English

Manufacturer for Gps Positioning System - RFID RD-100C – Tbit

Manufacturer for Gps Positioning System - RFID RD-100C – Tbit Featured Image
  • Manufacturer for Gps Positioning System - RFID RD-100C – Tbit
  • Manufacturer for Gps Positioning System - RFID RD-100C – Tbit
  • Manufacturer for Gps Positioning System - RFID RD-100C – Tbit
  • Manufacturer for Gps Positioning System - RFID RD-100C – Tbit

Short Description:


Product Manual

Product Detail

Related Video

Feedback (2)

We believe in: Innovation is our soul and spirit. High-quality is our life. Consumer need to have is our God for Scooter Sharing Paris, Site Positioning Systems, Bicycle Sharing Companies, We play a leading role in providing customers with high quality products good service and competitive prices.
Manufacturer for Gps Positioning System - RFID RD-100C – Tbit Detail:

Functions:

– Centimetre parking accuracy

– OTA upgrade

SPECIFICATIONS:

Device parameters
RFID reader Dimension Length, width and height: 140mm × 100mm ×16mm
Input voltage range Supported wide voltage input: 4.5V-100V
Interface Communication Mode 485 Communications
Power dissipation Normal work :<5mA@48V
Level about waterproof and dust-proof  IP67
Shell materials  ABS+PC, V0 fireproof level

 

RFID radio frequency performance
Frequency 13.56MHz
Identification distance 0-27cm
Response rate ms grade

 

Functional Description:

Function list Features
Centimeter parking accuracy The RFID identification distance can be set between 0 and 1 meters, and the identification distance can be set according to the RFID reader installed in different positions of the e-bike to meet the requirements of accurate parking.
OTA upgrade The device can be upgraded remotely.

 

Installation instructions:

1.Installation instructions about the RFID reader:

The RFID reader needs to be installed on the e-bike. Each e-bike need to be equipped with an RFID reader. The RFID reader is connected to the smart IOT device. The installation location is generally under the e-bike’s pedals. The antenna needs to be facing the ground, and there should be no metal shielding directly under it.

2.Installation instructions about the RFID label:

RFID labels can be determined according to the number of the e-bikes can be parked in the parking site, and each location of a e-bike only needs to install an RFID label on the ground directly below the e-bike.

Related products：

Product detail pictures:

Manufacturer for Gps Positioning System - RFID RD-100C – Tbit detail pictures

Manufacturer for Gps Positioning System - RFID RD-100C – Tbit detail pictures

Manufacturer for Gps Positioning System - RFID RD-100C – Tbit detail pictures

Manufacturer for Gps Positioning System - RFID RD-100C – Tbit detail pictures

Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" plus the theory of "quality the basic, have faith in the main and management the advanced" for Manufacturer for Gps Positioning System - RFID RD-100C – Tbit , The product will supply to all over the world, such as: Azerbaijan, Spain, New Zealand, We set a strict quality control system. We have return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our products. Please feel free to contact us for further information if you have any questions. We are glad to work for every client.
    • We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
    5 Stars By Hellyngton Sato from Kuwait - 2018.06.09 12:42
    This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
    5 Stars By mary rash from French - 2018.09.23 18:44
    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close