English

High Quality for Dish Positioner - RFID RD-100C – Tbit

High Quality for Dish Positioner - RFID RD-100C – Tbit Featured Image
  • High Quality for Dish Positioner - RFID RD-100C – Tbit
  • High Quality for Dish Positioner - RFID RD-100C – Tbit
  • High Quality for Dish Positioner - RFID RD-100C – Tbit
  • High Quality for Dish Positioner - RFID RD-100C – Tbit

Short Description:


Product Manual

Product Detail

Related Video

Feedback (2)

In order to give you convenience and enlarge our business, we also have inspectors in QC Team and assure you our best service and product for Sharing Bike Solution, Gps Reverse Positioner, Global Positioning System In Tamil, Safety as a result of innovation is our promise to each other.
High Quality for Dish Positioner - RFID RD-100C – Tbit Detail:

Functions:

– Centimetre parking accuracy

– OTA upgrade

SPECIFICATIONS:

Device parameters
RFID reader Dimension Length, width and height: 140mm × 100mm ×16mm
Input voltage range Supported wide voltage input: 4.5V-100V
Interface Communication Mode 485 Communications
Power dissipation Normal work :<5mA@48V
Level about waterproof and dust-proof  IP67
Shell materials  ABS+PC, V0 fireproof level

 

RFID radio frequency performance
Frequency 13.56MHz
Identification distance 0-27cm
Response rate ms grade

 

Functional Description:

Function list Features
Centimeter parking accuracy The RFID identification distance can be set between 0 and 1 meters, and the identification distance can be set according to the RFID reader installed in different positions of the e-bike to meet the requirements of accurate parking.
OTA upgrade The device can be upgraded remotely.

 

Installation instructions:

1.Installation instructions about the RFID reader:

The RFID reader needs to be installed on the e-bike. Each e-bike need to be equipped with an RFID reader. The RFID reader is connected to the smart IOT device. The installation location is generally under the e-bike’s pedals. The antenna needs to be facing the ground, and there should be no metal shielding directly under it.

2.Installation instructions about the RFID label:

RFID labels can be determined according to the number of the e-bikes can be parked in the parking site, and each location of a e-bike only needs to install an RFID label on the ground directly below the e-bike.

Related products：

Product detail pictures:

High Quality for Dish Positioner - RFID RD-100C – Tbit detail pictures

High Quality for Dish Positioner - RFID RD-100C – Tbit detail pictures

High Quality for Dish Positioner - RFID RD-100C – Tbit detail pictures

High Quality for Dish Positioner - RFID RD-100C – Tbit detail pictures

Related Product Guide:
"Based on domestic market and expand overseas business" is our improvement strategy for High Quality for Dish Positioner - RFID RD-100C – Tbit , The product will supply to all over the world, such as: Algeria, Mombasa, Suriname, We've more than 10 years exported experience and our products and solutions have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
    • The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By Gwendolyn from Dominica - 2017.03.07 13:42
    On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
    5 Stars By Irene from Florence - 2017.06.19 13:51
    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close