English

factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit

factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit Featured Image
  • factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit
  • factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit
  • factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit
  • factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit

Short Description:


Product Manual

Product Detail

Related Video

Feedback (2)

All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Wheels Rental Scooter, Glonass Positioning System, Navstar Global Positioning System, "Quality 1st, Rate least expensive, Provider best" is definitely the spirit of our company. We sincerely welcome you to go to our business and negotiate mutual small business!
factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit Detail:

Functions:

– Centimetre parking accuracy

– OTA upgrade

SPECIFICATIONS:

Device parameters
RFID reader Dimension Length, width and height: 140mm × 100mm ×16mm
Input voltage range Supported wide voltage input: 4.5V-100V
Interface Communication Mode 485 Communications
Power dissipation Normal work :<5mA@48V
Level about waterproof and dust-proof  IP67
Shell materials  ABS+PC, V0 fireproof level

 

RFID radio frequency performance
Frequency 13.56MHz
Identification distance 0-27cm
Response rate ms grade

 

Functional Description:

Function list Features
Centimeter parking accuracy The RFID identification distance can be set between 0 and 1 meters, and the identification distance can be set according to the RFID reader installed in different positions of the e-bike to meet the requirements of accurate parking.
OTA upgrade The device can be upgraded remotely.

 

Installation instructions:

1.Installation instructions about the RFID reader:

The RFID reader needs to be installed on the e-bike. Each e-bike need to be equipped with an RFID reader. The RFID reader is connected to the smart IOT device. The installation location is generally under the e-bike’s pedals. The antenna needs to be facing the ground, and there should be no metal shielding directly under it.

2.Installation instructions about the RFID label:

RFID labels can be determined according to the number of the e-bikes can be parked in the parking site, and each location of a e-bike only needs to install an RFID label on the ground directly below the e-bike.

Related products：

Product detail pictures:

factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit detail pictures

factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit detail pictures

factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit detail pictures

factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit detail pictures

Related Product Guide:
Our firm sticks on the theory of "Quality will be the life in the enterprise, and status could be the soul of it" for factory Outlets for Navigation And Positioning - RFID RD-100C – Tbit , The product will supply to all over the world, such as: Saudi Arabia, Argentina, French, Our company insists on the purpose of "takes service priority for standard, quality guarantee for the brand, do business in good faith, to offer skilled, rapid, accurate and timely service for you". We welcome old and new customers to negotiate with us. We are going to serve you with all sincerity!
    • This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By Patricia from New York - 2017.10.13 10:47
    This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
    5 Stars By Beulah from Belarus - 2018.06.26 19:27
    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close