factory low price Scooter And Bike Rental - GPS Tracker Model NB-100 – Tbit

Short Description:

Product Detail

Feedback (2)

We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for Smart Scooter System, Superjack Positioner, Sharing E-Bike Platform Cost, Our group members are goal to provides merchandise with significant performance cost ratio to our consumers, as well as target for all of us is usually to satisfy our consumers from all around the environment.

factory low price Scooter And Bike Rental - GPS Tracker Model NB-100 – Tbit Detail:

Functions:

ACC detection

Geo-fence

OTA update

Real-time tracking

Mileage statistics

Remote control

Installation instructions:

1. Install the SIM card and backup battery

Open the battery compartment cover, insert and fasten the SIM card, and close the battery compartment cover after installing the backup battery correctly.

2.Install tracker into vehicle

2.1 It’s recommended to install the host by the professional body appointed by the dealer and meanwhile please keep the following matters in mind:

2.2 To avoid damage by thieves, please install the host in a concealed place;

2.3 Please don’t install it near emitters such as parking sensor, and other vehicle-mounted communication equipment;

2.4 Please keep it away from high temperature and high humidity;

2.5 To prevent influencing the vibration detection effect, please fix it with a strapping tape or double-sided adhesive tape;

2.6 Please be sure the right side up and without any metal objects above.

3.Install Power Cable ( Wiring)

3.1 The standard power supply of this equipment is 12V, the red wire is the positive pole of the power supply, and the black wire is the negative pole of the power supply;

3.2 The negative pole of the power supply should be grounded separately, and do not connect with other ground wires;

4.ACC detection wire connection method (the electric door lock connection method is similar to this)

4.1 ACC signal line

ACC line is generally found in the wiring harness in the decorative panel under the steering wheel and the wiring harness in the central electrical box. The ACC signal line is the main basis for the host to judge whether the vehicle is in the starting state.

4.2The way to find it

Find the thicker wire in the ignition switch harness, use one end of the test light to tie the iron, and the other end to test on the wire connector: when the ignition switch is set to “ACC” or “ON”, the test light is on; turn off the ignition After the switch, the test light is off, and this connection is the ACC line.

SPECIFICATIONS

Dimension	784418.5 mm	Working voltage	9v-90v
TTFF	Cold strat：28s，Hot strat：1s	Maximum transmit Power	1W
Location accuracy	3M	Operating temperature	-20°C to 70°C
Humidity	20%–95%	Antenna	Inner antenna
Frequency	HDD-FDD B3 B5 B8	Backup battery	600mAh/3.7V
Tracking sensitivity	<-163 dBm	Speed accuracy	0.1m/s
Sensor	Built-in 3D acceleration sensor	LBS	Support

Accessories:

NB-100 Tracker

Cable

User manual

Product detail pictures:

Related Product Guide:

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for factory low price Scooter And Bike Rental - GPS Tracker Model NB-100 – Tbit , The product will supply to all over the world, such as: Kuala Lumpur, Estonia, moldova, All the imported machines effectively control and guarantee the machining precision for the products. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality products and have the ability to develop new products to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.

Delivery E-Bike Rental