Factory directly Scooter Rental For Delivery - GPS Tracker Model NB-100 – Tbit

Short Description:

Product Detail

Feedback (2)

Dependable high-quality and fantastic credit standing are our principles, which will help us at a top-ranking position. Adhering to your tenet of "quality very first, client supreme" for Soldier Health And Position Tracking System, Sharing Scooter Platform Development Price, Customization Of Sharing Bike Application, The many thoughts and suggestions is going to be drastically appreciated! The great cooperation could boost each of us into better development!

Factory directly Scooter Rental For Delivery - GPS Tracker Model NB-100 – Tbit Detail:

Functions:

ACC detection

Geo-fence

OTA update

Real-time tracking

Mileage statistics

Remote control

Installation instructions:

1. Install the SIM card and backup battery

Open the battery compartment cover, insert and fasten the SIM card, and close the battery compartment cover after installing the backup battery correctly.

2.Install tracker into vehicle

2.1 It’s recommended to install the host by the professional body appointed by the dealer and meanwhile please keep the following matters in mind:

2.2 To avoid damage by thieves, please install the host in a concealed place;

2.3 Please don’t install it near emitters such as parking sensor, and other vehicle-mounted communication equipment;

2.4 Please keep it away from high temperature and high humidity;

2.5 To prevent influencing the vibration detection effect, please fix it with a strapping tape or double-sided adhesive tape;

2.6 Please be sure the right side up and without any metal objects above.

3.Install Power Cable ( Wiring)

3.1 The standard power supply of this equipment is 12V, the red wire is the positive pole of the power supply, and the black wire is the negative pole of the power supply;

3.2 The negative pole of the power supply should be grounded separately, and do not connect with other ground wires;

4.ACC detection wire connection method (the electric door lock connection method is similar to this)

4.1 ACC signal line

ACC line is generally found in the wiring harness in the decorative panel under the steering wheel and the wiring harness in the central electrical box. The ACC signal line is the main basis for the host to judge whether the vehicle is in the starting state.

4.2The way to find it

Find the thicker wire in the ignition switch harness, use one end of the test light to tie the iron, and the other end to test on the wire connector: when the ignition switch is set to “ACC” or “ON”, the test light is on; turn off the ignition After the switch, the test light is off, and this connection is the ACC line.

SPECIFICATIONS

Dimension	784418.5 mm	Working voltage	9v-90v
TTFF	Cold strat：28s，Hot strat：1s	Maximum transmit Power	1W
Location accuracy	3M	Operating temperature	-20°C to 70°C
Humidity	20%–95%	Antenna	Inner antenna
Frequency	HDD-FDD B3 B5 B8	Backup battery	600mAh/3.7V
Tracking sensitivity	<-163 dBm	Speed accuracy	0.1m/s
Sensor	Built-in 3D acceleration sensor	LBS	Support

Accessories:

NB-100 Tracker

Cable

User manual

Product detail pictures:

Related Product Guide:

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Factory directly Scooter Rental For Delivery - GPS Tracker Model NB-100 – Tbit , The product will supply to all over the world, such as: Indonesia, Lahore, Berlin, We welcome you to visit our company, factory and our showroom displayed various products that will meet your expectation, meanwhile, it is convenient to visit our website, our sales staff will try their efforts to offer you the best service. If you need to have more information, remember to do not hesitate to contact us by E-mail or telephone.

Bike And Scooter Rental