GPS Tracker Model S7
Functions:
Real time tracking
Polygon Geo-fence alarm
Track playback
Mileage statistics
Remote control
Vibration alarm
Installation instructions:
1.Install the SIM card
Open the SIM card holder according to the direction reminder write on holder, then insert the SIM card and press it once.
2.Install tracker into vehicle
It’s recommended to install the host by the professional body appointed by the dealer and meanwhile please keep the following matters in mind:
To avoid damage by thieves, please install the host in a concealed place;
Please don’t install it near emitters such as parking sensor, and other vehicle-mounted communication equipment;
Please keep it away from high temperature and high humidity;
To prevent influencing the vibration detection effect, please fix it with a strapping tape or double-sided adhesive tape;
Please be sure the right side up and without any metal objects above.
3.Install Power Cable ( Wiring)
The normal working voltage of this device is 9V～30V, the red and black cables refer to the positive and negative wires respectively of the power supply;
Please ground the negative wire separately rather than connection with other earth wires;
SPECIFICATIONS
|
Sensitivity |
<-162 dBm |
TTFF |
Cold Start 45s, Hot Start 2s |
|
Fix Accuracy |
10m |
Speed Accuracy |
0.3m/s |
|
Band |
GSM 850/900/1800/1900MＨｚ |
Dimension |
70mm×32mm×10.5mm |
|
Operating voltage
|
9V～30V（For car and motorcycle）
|
Maximum operating current |
< 300mA（12V） |
|
Operating current in normal mode |
< 15mA（12V） |
Working temperature |
-20 ℃ ～ +70 ℃ |
|
Working humidity |
20 ～ 95% |
|
|
Accessories:
|
S7 Tracker |
Cable |
User manual |
